John Williams Gas Engine Auction

by Aumann Auctions, Inc.

When

June 21, 2011 Ends June 21, 2011 at 6:00 P.M. Central

Where

2901 East County Road 500 South New Castle, IN

How

Online Only

Notes

John has a wonderful collection of rare and early engines. So many great pieces, several Early Foos Engines, Sta-Rite, IHC Famous Engines, Brownwall, Olds and more. Many of the engines are in their work cloths with great original paint and decals. There are also plenty of parts, early swing top oilers, Auto Sparkers, Webster Magnetos, Wico Magnetos, Coils and more. This will be an Online Only Auction.

Share This Auction

Aumann Auction Staff Will Be On Site On The Auction Date To Assist With Online Bidding.
 
 
Items Can Be Viewed June, 9th-11th.
Time 9am-5pm
 
Pickup for this auction will be June 27, 2011
Time 9am-5pm


Feature Engines

1904- 2 HP Foos, tank cooled, serial #21023, 390 RPMS, on wooden skid, repainted, loose, natural gas, great early engine!

 

11 HP Foos, hopper cooled, serial #33620, Sumpter magneto, spark plug ignition, re-painted with some original paint, has a disc crank, has a reproduction Foos muffler, original clutch pulley,sitting on Betendorf trucks which sell with the engine

 

 

Engines

 

2 HP Jacobson Side Shaft, serial #2181, tank cooled, original paint, Lunkenheimer carburetor, loose, igniter,muffler, wooden belt pulley, has reproduction water tank, sitting on engine trucks, great early engine!

 

IHC 2 HP Vertical Famous, tank cooled, 400 rpm, nice original engine on original skids, the head and cylinder has a on repair the water jacket, has cast iron belt pulley, serial # KA12843-E

 

1-3/4 HP Stickney, hopper cooled,serial # 21897, older repaint, igniter with original low tension coin, unknown if coil is in working condition, loose, with Stickney clutch pulley which measures about 5-1/2 inches

 

1-1/2 HP Gray Motor Company Detroit, hopper-cooled, serial # 425092, older repaint, unstuck, spark plug ignition, on skids,with gas tank

 

2 HP Foos, hopper cooled, serial number unknown, older repaint, Lunkenheimer carburetor, loose, on skids, spark plug ignition, after market fuel tank

 

4 HP United, hopper cooled, serial #120404, Type A, made in Lansing Michigan, original with some original paint, loose,igniter, muffler, belt pulley, crankshaft guard, carburetor, is on a set of Hercules trucks which sell with the engine

 

2 HP Alma McVicker, hopper cooled, McVicker Automatic Gas and Gasoline Engine, serial # 5943, Type 1AA, 400 RPMS, engine has all original paint, reproduction muffler, igniter, pulley not original,loose, Alma Manufacturing Company, 1903 and 1904 patent dates

 

5 HP Fluted Aermotor, original paint,original gas tank, reproduction crank guard, original hopper flutes, igniter, famous muffler, belt pulley, selling with International Harvester Company trucks in good condition

 

2-1/2 HP Moon Brothers, hopper cooled,piston has two breaks in the back on the piston for the crank to clear, good compression, older restoration, unstuck, spark plug, belt pulley, has a reproduction hopper

 

1-1/2 HP Economy, hopper cooled, 650RPM, serial # 316772, all original with great original decal on hopper, Wico magneto ignition, Wico magneto is hot, loose

 

4 HP Sandow, hopper cooled, serial #106412, original paint, igniter, original muffler, Lunkenheimer carburetor, loose, on steel framed engine truck and wheels

 

1 -1/2 HP Brownwall, hopper cooled, serial# 1619, spark plug ignition, original paint, belt pulley, with engine coil, on engine cart which sells with engine, loose, great original little engine!

 

IHC 4 HP, hopper cooled, serial #GA11750-E, all original with great paint and some great pin stripping!, original battery box, sitting on original IHC skid, IHC muffler, belt pulley, original IHC cart, the front axle on the engine cart has been bent

 

1 HP Rock Island, hopper cooled, serial# 3568, 500 RPM, Patent Dates are December 17, 1907 & Feb 25, 1908 &Feb 15, 1909 & Feb 23, 1909 & Aug 8, 1911; all original with original paint, unstuck, great Rock Island decal on hopper, original crank guard,original battery box, igniter, muffler, on 4 wheel cart, cart in good original condition

 

1 HP Fairbanks Morse Jack Junior,hopper cooled, serial # 137431, igniter, carburetor, muffler, original crank guard, gas tank, loose

 

1-1/2 HP Associated Air Cooled, The Chore Boy, all original engine, great original paint, original battery box,original gas tank, loose, on three wheel cart which sells with the engine, igniter,crank guard, muffler

 

5 HP Galloway, hopper cooled, serial# 14416, round rod Galloway re-painted, igniter, muffler, loose, Lunkenheimer carburetor sitting on Galloway trucks which sell with the engine

 

1-1/2 HP Sta-Rite, hopper cooled, serial# 10026, Type A7, 450 RPM, re-painted, unstuck, igniter, crank guard, carburetor, muffler, gears have been re-worked and are in like new condition, igniter trip and igniter have also been rebuilt, sells with four wheeled engine cart

 

4 HP Sta-Rite Engine, hopper cooled,serial # 6390, Type BC1, all original, great original paint, loose, igniter,crank guard, muffler, on engine cart which sell with the engine, sells with the original wooden skids

 

1-1/2 HP Olds, hopper cooled,original paint, loose, spark plug, hopper cover, belt pulley, reproduction muffler, on Olds engine trucks which sell with the engine

 

4-1/2 HP Olds, Number 3 Type A, Shop# D2398, all original paint, great decals on hopper and back of engine, original hopper cover, pot muffler, spark plug ignition, loose, great original condition, engine sells with trucks and tongue,

 

1-1/2 HP Hercules, hopper cooled, serial# 251097, original paint, unstuck, nice decal on side of hopper, igniter with Webster magneto, belt pulley, no muffler, selling with original trucks, reproduction crank guard

 

2 HP Foos, hopper cooled, serial #32232, 400RPMS, repainted, muffler, the igniter trip is off and is included,loose, spark plug ignition, sitting on engine trucks which sell with the engine

 

2-1/2 HP United, hopper cooled,serial #150086, Type A engine, igniter, loose, original paint, Lunkenheimer carburetor,belt pulley, reproduction crank guard, on engine trucks which sell with the engine

 

5 HP Sandow, hopper cooled, igniter and Webster magneto, crank guard, Lunkenheimer carburetor, muffler, loose, rocker has been broken and repaired, older re-paint, belt pulley, sitting on heavy cast wheel trucks which sell with the engine

 

2 HP Vertical Fairbanks Morse, water cooled, serial # 64653, original paint, replacement water pump, replacement water tank, original hand crank, on engine trucks which sell with the engine, belt pulley, battery box, muffler, this is a great little engine in fantastic original condition!

 

Aermotor Company. Pump Jack Engine, original condition with original paint, on original skids, igniter, muffler,carburetor, on engine trucks that sells with the engine, two wheels have a chip of out the rim.

 

6 HP Chanticleer, hopper cooled, serial# unknown, igniter, carburetor, re-painted, reproduction crank guard, clutch pulley, bottom of cylinder has been repaired, bore measures about 6 inches, sitting on set of engine trucks which sell with the engine, trucks in good condition

 

4 HP Hot Tube Vertical Air Cooled Eclipse serial # 1920, 450 RPMS, older re-paint with original tin work around fins,unstuck, clutch pulley

 

IHC 6 HP, Famous, hopper cooled, Victor Engine, serial # JC214E, older re-paint, with IHC clutch pulley, sitting on sub-base, head has been repaired, exhaust pot muffler in good condition, original crank guard, igniter, loose, sitting on engine trucks which sell with the engine, planetary gear sells with the engine

 

Fuller & Johnson Air-Cooled Vertical, nice greasy engine with some original paint, loose, includes pump jack, good condition, spark plug and coil ignition

 

IHC 1-3/4 HP Mogul, hopper cooled, on skids, older repaint, loose, complete, good condition, igniter, magneto,original muffler, crank case breather, carburetor, original crank

 

2-1/4 HP Foos, tank cooled, serial #32418, great original paint, unstuck, on sub base, spark plug ignition, muffler, Lunkenheimer carburetor, reproduction water tank, on engine cart which sells with the engine

 

2 HP Quincy, hopper cooled, original paint, Schebler carburetor, Wico ignition, loose, sitting on trucks which sell with the engine

 

1 HP Alma Jr., hopper cooled, original paint, loose, muffler, spark plug ignition, carburetor, on skids

 

1 HP Root & Vandervoort, hopper cooled,serial # AR48244, igniter, belt pulley, great original decal on side of hopper,original paint, Early RV engine with John Deere Lettering still visible on the original skids, on engine cart which sells with the engine

 

1-3/4 HP Associated, hopper cooled,serial # 330953, repainted, igniter, carburetor, muffler, loose, on enginecar which sells with engine

 

5 HP Hopper Cooled Foos serial #27796, 330RPMS, natural gas, great original paint, muffler and carburetor have been repainted, unstuck, spark plug ignition, on skids, has been repair to the valve chamber casting

 

2 HP Simplicity Hopper Cooled Engine repainted, igniter, carburetor, muffler, loose, on skids, fuel tank

 

International Harvester Power Unit,repainted, with belt pulley drive, serial # B55-2224

 

1-1/2 HP IHC M Engine serial #W54227, Wico ignition, original crank, belt pulley, muffler, on original trucks with tongue, original paint,

 

1-1/2 HP Stover, hopper cooled, serial# KE1906476, 600 RPM, original paint, with Wico magneto, magneto is not working,original fuel tank

 

1 Cylinder Horizontal Maytag Engine original, loose

 

Fairbanks Morse Model Z, hopper cooled, serial # 706666, original, un-restored, magneto, spark plug ignition,solid cast flywheel, loose

 

2 Cylinder Edwards Hopper Cooled Engine, Edwards Motor Company, Springfield, OH, for parts or restoration, is apart but mostly complete, has crankshaft, no magneto, head, mufflers, and crank shaft bearings, stuck,spark plug ignition

 

1-1/2 HP Z Fairbanks serial # 588355,unstuck, for parts or rebuild, crank guard, carburetor, rocker arm, original battery box with coil, solid cast flywheels, some original paint, no magneto

 

2-1/2 HP Sandwich, engine for parts,includes base with crankshaft bearings and caps, hopper cooled cylinder, both cylinder and base are in good used condition, includes flywheels and crankshaft, one spoke is cracked in flywheel

 

Z Fairbanks Morse Style C, for parts,missing magneto, missing carburetor, 800RPM, 52, spark plug, automotive style radiator, with original crank

 

5 HP Sattley, hopper cooled, serial #39312, 425 RPM, for parts or restoration, igniter, crank guard, belt pulley,partial muffler, head has been cracked and welded, rocker arm has been broken and repaired, some original paint, un-restored condition

 

1 HP Gray, hopper cooled, serial #42568, brass tag, original paint, loose, one flywheel seems to wobble when running, probably has a bent crank shaft, spark plug ignition, belt pulley,muffler

 

Working Models
 

1/3 Scale Model of 10 HP Sandwich Engine great condition, running condition, flywheel is approximately 9 inches in diameter

 

Case 1/4 Scale Bailer working condition, runs with a Briggs and Stratton motor, be the envoy of other collectors at your next engine show! Great Piece!

 

Engine Magnetos

 

Rebuilt Wico EK Magneto hot mag,ready to go

 

Wizard Auto Sparker good used condition, friction drive, Wizard Hercules Electric Company, Indianapolis, IND,Type B1, 89468

 

Auto Sparker Mossier Device Manufacturing Company, friction drive, good used condition, working condition,with flat mounting bracket, pat. 1900 and 1903, No.B72684

 

Webster Rebuilt Magneto, mag is hot and ready to go

 

Webster Tri-Polar Magneto, mag is hot,original condition

 

Type EK Wico Magneto – Rebuilt, hot mag, ready to go

 

Engine Parts

 

International Harvester Company Coil good used coil

 

5 HP Galloway Webster bracket and igniter trip has been repainted, in good used condition

 

1-1/4 Lunkenheimer Carburetor good condition, loose, needle valve in good working condition

 

Several different makes of gas engine mufflers

 

Wooden Gas Engine Battery Box includes switch, dove tailed box, box measures: 7-3/4 tall and 10-1/4 long, and7-1/2 wide, segmented for coils, good used condition

 

Round Gas Engine Gas Tank with brackets reproduction tank with brackets, tank measures about 7-3/4 inches in diameter and about 10 inches long

 

IHC 8 HP Famous Water Pump plunger and casting both are missing part of the casting

 

IHC 8 HP Famous Parts includes:igniter trip, two piston rings, one has a chip in the end, IHC cast lid,

 

Brass Gas Engine Priming Cups

 

IHC Gas Engine Crank

 

Several gas engine-starting cranks

 

Sandwich starting cranks

 

Hercules or Economy starting cranks  

 

Belt Pulley for 1-1/2 HP Economy 6inch in diameter, re-painted, good used condition

 

Wooden Gas Engine Coils

 

Webster Electric Company Coil

 

1 inch Lunkenheimer Carburetor new needle valve, good working condition

 

IHC Original Wooden Skid overall length is 63 inches in length and 20 3/4 inches wide

 

Maytag Muffler, good used condition

 

Landsing Company, Gas Engine Tag,Reads: Landsing Company, Lansing Michigan, Mention Engine Number in Ordering Parts, H.P. B, NO.B108747, Speed600, brass tag good condition, nice patina, measures 3-3/4 inches by 1-1/2inches

 

Engine Oilers

 

Rare Reed Milk Can Oiler ultra rare Reed Milk can oiler in great condition, about 2-1/2 inches tall and 1-1/2 in diameter

 

Lunkenheimer Crown Swing Top No.4Oiler good condition, good glass,

 

Lunkenheimer Crown Swing Top No. 4Oiler good condition, great patina, good glass

 

Lunkenheimer Universal No.6 Pump Oiler, amazing brand new condition, in original packing box with original tag,still has packing straw, glass body oil pump, great piece for any collector

 

Michigan Swing Top Oiler, 3-inch diameter

 

 

 

The D.T. Williams Swing Top Oiler No.3 Topaz Oiler, good glass

 

 

The D.T. Williams Valve Swing Top Oiler No. 0, Topaz Oiler, good glass

 

The D.T. Williams Valve Co. Swing Top Oiler No.2 Topaz oiler, glass in good condition

 

Lunkenheimer Paragon No. 1-1/2 Oiler good condition, glass in good condition, check valve

 

2- Lunkenheimer Sentinel Oiler- 1-1/2both are in good condition, both glasses are cracked and broken

 

G.B. Essex Oiler 2-1/4 inch diameter,good glass, with check valve

 

Essex Engine Oiler measures about 2inches in diameter, good glass, good condition, with check valve

 

Duke D.T. Williams Rod Oilers One oiler is a Duke No. 2 and two are Duke No. 0

 

Reed Engine Oiler brass site glass,unpainted, working condition

 

Reed Engine Oiler re-painted, working condition

 

Engine Trucks

 
 

(3) 1 -1/2 HP Sandwich engine truck,in good condition

 

2 HP Sandwich engine truck,repainted, good condition,

 

1-1/2 to 2 HP Fairbanks engine truck with tongue, good used condition

 

1-2 HP Spartan engine truck, there Is a chip out of one wheel rim, includes tongue, good used condition

 

 

 

1-1/2 Galloway truck, repainted, with tongue, wheels and castings in good condition

 

 

Steam Engine and Parts
 
 

5 by 5 Star Vertical Steam Engine can be run in both forward and reverse directions, mechanical oiler, loose, fly ball governor,

 

Vertical Steam Engine Boiler Gem City Boiler, about 64 inches tall and about 24 inches in diameter, includes the original grates, includes chimney flu

 

Lunkenheimer Brass Steam Whistle3-200 stamped on brass valve, in great working condition, overall length about1 foot, whistle about 8 inches, about 3 inches in diameter

 

1 Pint Brass Detroit Steam Lubricator good site glasses, good used condition

 

Hamilton Brass Steam Lubricator good site glasses, good used condition

 

Powell 1/3 Pint Brass Steam Lubricator good site glass, good used condition

 

Unmarked Brass Steam Lubricator good site glass, good used condition, measures about 2.5 inches in diameter and 3-3/4inches tall, overall height is 9 inches tall

 

Pickering Fly Ball Governor great condition, Made by Pickering Governor Company, Portland, Conn, USA

 

Fly Ball Governor 600 Revolutions,great condition

 

 

Vehicles

 

1926 Model T Ford Car older restoration, interior has been re-upholstered, tire treads are good, by weather crack and may need replacement, sells with an Indiana title

 

Gibson Master Vibrator Coil Box with coil Master Vibrator, Gibson Automobile Indianapolis Company, for early car,includes coil

Cushman Motor Scooter model 32, 4 HP,auto guide husky engine, engine # A32485, Engine model is 15M71, older repaint,very good condition

 

 

Pedal Tractors and Toys

 

Sears Diesel 2-Ton Pedal Tractor some original paint, tri-cycle

 

John Deere 8520 Pedal Tractor good condition, decal peeling on one side, wide front, cast body

 

Toy Tin Steam Engine, good condition,made in German, seems complete

 

 

Tractor, Implements & More

 

John Deere Unstyled Model B Tractor serial # B35803, unrestored, on steel wheels, flat spoke rear wheels with lugs,controls are free, round spoke fronts, narrow front, Wico magneto, loose

 

International Harvester 1 Bottom plow mechanical lift, unrestored, on steel wheels, PO14608

 

Belt Driven Griss Mill older restoration, 55 inches tall, 37.5 long and 28 inches wide, in working condition

 

Belt Operated Rock Crusher Denver Fire and Clay Company, No. 2 Rock Crusher, on heavy cast iron wheels, working condition

 

Belt Operated Grinder re-painted,working condition, measures 3 feet long by 2 feet tall

 

Horizontal Water Pump V and K, The Vailer Kimes Company, Dayton Ohio, serial # 51745, on stand, pulley driven

 

Two Air Compressors two cylinder opposed air compressor and one cylinder vertical air compressor

 

Foot Operated Grinder with seat working condition, un-restored

 

Two Engine Pump Jacks Flint and Walling pump jack re-painted, loose; Heller pump jack , unpainted, stuck

 

John Deere Pump Jack unpainted,unrestored, stuck

 

Blacksmith made bear trap jaws measure 13 inches, 49 inches overall length, recently made in the last 2 years by local blacksmith 

 

Terms of the Auction: 5% Buyers Premium On-Site with a 5% discount for those who pay by cash or check. 5% Buyer’s Premium for All Live Internet and Proxibid Absentee Bids with a 5% discount for those who pay by cash or check. 5% Buyer’s Premium for Aumann Absentee Bids. Please bring a bank letter of

guarantee for purchases over $10,000. Information is subject to change. All lots are sold as is, where is, with all faults, imperfections and errors of description. Due

diligence is the responsibility of the bidder/buyer. All sales are final. No credit

card charge backs will be allowed. Purchases may be removed upon receipt of payment

in full. Buyers assume complete responsibility for care of each purchase at time of sale. We reserve the right to refuse service to anyone. All statements made prior to the sale of any item take precedence over written material and any prior verbal

statements. The auction company is not responsible for accidents, thefts, errors or

omissions.















Terms:







1. Catalog: Aumann Auctions has put forth every effort in preparing the catalog for this auction to

provide accurate descriptions of all items. All property is sold 'as-is' and it is

the bidder’s responsibility to determine the exact condition of each item. Printed

statements or descriptions by staff are provided in good faith and are matters of

opinion.











2. FOR LIVE INTERNET AND ABSENTEE BIDDING ON

PROXIBID: There is a 10% Buyer's Premium added to the total.



FOR ABSENTEE BIDDING ON AUMANNAUCTIONS.COM: There is a 5% Buyer's Premium added to your total purchase. Absentee bidding closes at 10:00 AM the day prior to the auction.











3. Payments: All accounts must be settled at the conclusion of the auction. We accept Visa & MasterCard ONLY. Your credit card will be charged for your purchases, plus buyer’s premiums, and any taxes. A pre-auction authorization will be performed to establish available credit. Debit cards may show a hold on funds for a short period of time. NOTHING will be charged to your card until a purchase is made. Each transaction necessary to collect insufficient funds will have a $25 fee imposed. Note: Checks may be processed the day of the auction; be sure to have adequate funds in your account.











4. Pickups: If you

wish to pickup your items, please make arrangements at least one business day prior

to your pickup. It is the buyer’s responsibility to check all contents of the package before removing it from the premises. If you pickup at an auction location or by another arrangement it is also your responsibility to check the contents of the package in the company of an Aumann Employee. We will not be held responsible for damaged or missing pieces once the package is in possession of the bidder. It’s your responsibility to review your purchases and their condition.







5.

Shipping: Shipping is at the discretion of Aumann Auctions; if there is question on

whether the item is able to be shipped, please contact the shipping department prior

to the auction. The auction company, through the United States Postal Service or

United Parcel Service, can arrange packing and shipping. Packing and shipping costs

are the responsibility of the buyer and may be quoted before shipping. All items will

be insured for the purchase price. Our first priority is to deliver your new purchase

in excellent condition.







6. Missing Items: We document the contents of

each package. If we have missed an item in your shipment our documentation will show

that. Please notify us within 2 business days of receiving the package if you think

something is not included. If our documentation shows it was not packed we will

forward it immediately at our cost. We are not responsible for boxes opened by anyone

other than the owner. Please check the entire box and packaging for contents. DO NOT

discard the original shipping box and packaging if you think something is missing or damaged.







7. Storage: A minimum charge of $10 per week storage fee for items that are held here at our auction center over 10 days. If you have a large amount other charges may apply. In addition to the storage fee, the buyer is still responsible for paying labor costs to prepare your items for pickup.







8. Live Internet Bidding: Our online auctions move quickly! If you are interested in an item, bid quickly. If you win an item in the auction you will be notified by email. In order to have enough time to conduct authorizations, registration must be completed at least 24 hours in advance of the auction and if it is a multiple day event, 24 hours prior to the first day of the auction. If the day before an auction falls on a holiday or weekend, the deadline is the day before the holiday or the Friday prior to the auction.











9. Registration:

In order to better serve our customers, all bidders must provide their name, address,

daytime phone number, and email address at which they can be contacted. This is to

insure good communication between Aumann Auctions, Inc. and the bidder throughout any

transactions.











10. Unpaid Balances: The purchaser agrees to pay all reasonable attorney fees and costs incurred by the auction company in the

collection of funds. The purchaser also agrees that a fee of 2% per month be added to

the balance of any unpaid balance due the auction company and any other costs or

losses incurred by the purchaser’s failure to adhere to these terms. Any debt

collection or dispute proceedings will be heard in Montgomery County,

Illinois.











11. Bidding: The auctioneer has the sole discretion to advance the bidding and may reject a nominal advance, should it in his estimation prove injurious to the auction. The auctioneer shall be the final judge in all bidding disputes and shall name a bidder as the purchaser. The auction company shall

not be held responsible for any 'missed' bids or bids unseen by the auctioneer. By

bidding on any item, the bidder shows acceptance of the terms of the

auction.











12. All sales are final.











13.

The auction company reserves the right to refuse service to any person. All

announcements made day of auction take precedence over any and all written or verbal

statements.







14. All items must be removed from premises within two weeks or storage charges will apply. Any item left is at the buyer’s risk. The owner or auction company assume no risk.

Conducted By

Aumann Auctions, Inc.

1-888-282-8648

Ask The Auctioneer