Auction Listing
Featured Engines:
15 HP Reid Two Cycle Oil Field Engine older repaint, loose, 8" bore, on 11’ foot long trucks, about 18" clutch, tank cooled
Nova Vertical, 3 HP, carb, fuel pump, loose, some original paint, spark plug, Wico Mag bracket
1-3/4 IHC Mogul Hopper Cooled Engine s#Y8771, original on IHC skid, IHC pulley, carb, partial muffler, original crank with repair, IHC magneto, good hopper, nice greasy original!
Great Projects:
20HP Fairbanks Morse Buenos Ares Engine, tank cool Fairbanks Morse & Company Sucursal Sud Americana Buenos Aires Fairbanks Morse Oil Engine, Type Y, 20HP, No.173110, 350 RPM, stuck, cylinder 173110, loose Madison Kipp Lubricator 2 feed model 50, good flywheels, welding on head, Wico type OC no.42594 magneto, about 29" clutch pulley-stuck- no hand wheel
Fairbanks Morse Buenos Aries Engine size unknown, 30 HP?, tank cooled, no tags, head no. 371489H2588, cylinder no.027240, incomplete, stuck& repaired Madison Kipp Oiler, 60" flywheels
Ruston Buenos Ares Engine, tank cooled No. 133274, Size No. 4 Class M, stuck, partial Bosch magneto with arm, some original paint, piston, mains, rod & cap, counter weights, good flywheels, partial pulley with broken casting, about 8 inch bore, about 54" flywheels
Root & Vadervoort 3-1/2 HP - Argentina Engine # BL19330, old repaint, loose, hopper cooled, spark plug convert
Root & Vadervoort, 5HP?- Argentina Vertical, tank cooled engine, 5HP?, loose, incomplete, spark plug
International Harvester:
IHC 4 HP Parts Engines G762 on base, crankshaft, 1 main cap, broken governor weight, good cylinder, sub base, one flywheel has been converted for wood splitter
IHC 4HP Hopper Cooled Engine RE256E, stuck, cracked & welded head, welded rocker, welded rocker stand, welded carb, spark plug conversion, good hopper, stuck, mains, rod, piston, rod cap with bearings, includes an eccentric casting, governor weights, timing gear, good gearing, brass fuel pump, 14 inch clutch pulley-stuck-6.5 inches wide, subbase G762
IHC 4HP Hopper Cooled Parts Engine hopper, flywheels, base, subbase, stuck, piston crankshaft, mains, rod and cap, old repaint, good hopper, 12" IHC pulley with holes drilled for belting-8.5" wide
IHC Tom Thumb Parts Engine stuck, head, base, cylinder, flywheels, 1 flywheel has piece broken out of hub, TG, broken timing gear cover, 1 governor weight
International -1 HP Engine hopper cooled, carb, gas tank, original, unrestored, stuck, spark plug conversion, broken head, cream separator guard?
International 4 HP Engine #SC2275E, #G762 on base, hopper cooled, no igniter, stuck, carb, rocker holder welded, welded head, welded timing gear boss on crank case, sub base, pulley G678 13" wide and 16" diameter
International Mogul 2-1/2 HP Engine #CZ2607, broken crankcase, no mag, repaired rocker, hopper cooled, 8" pulley, igniter, carb, stuck
International Mogul 2-1/2 HP Engine #CZ4084, mag, stuck, broken tag, broken band on mag, broken assembly, no head, parts engine, 12" pulley
International Mogul 2-1/2 HP Engine #CZ4068, parts engine, on stuck, broken crank case, hopper cooled, no head, no igniter, wheels are 16", one wheel is bent, no piston, no rod
2-1/2 HP Hopper Cooled International Engine G6824, broken head, good detent parts, good hopper cooled cylinder, 1 main cap, piston with broken rod, stationary base, Some Great Parts!
2-1/2 HP IHC Mogul Parts Engine CZ2565, welded push rod casting, tag, 7" pulley, governor weights, broken carb, rocker arm, breather, timing gear, modified speed control for governor
2-1/2 HP Mogul Parts Engine CZ2312, includes: base, tag, mains, crank shaft, governor weights, good flywheels, loose
Large Selection of International, LB 1.5 to 2.5 and 3.5 to 5 engines
Large Selection of International M, 1-1/2 HP engines
Large Selection of International M, 3 HP engines
Fairbanks Morse Engines:
Fairbanks Morse 10 HP Z Engine #194001, hopper cooled, carb with broken cover, repaired rocker arm, igniter with mag bracket, no mag, crank case cover, stuck, governor bracket welded
Fairbanks Morse 10 HP Z Engine #206362, tank cooled, spark plug, welded head, original, unrestored, broken casting on bottom of cylinder head
10 HP Fairbanks Morse Hopper Cooled Engine homemade tin hopper, Madison Kipp 6 feed lubricator on front, carb, rocker arm, rocker arm holder welded on head, governor weights, timing gear, igniter with mag bracket, crank guard, 20" pulley, stuck, mains, rod and cap, fuel pump
6HP Fairbanks Morse Z Hopper Cooled Engine holes drilled in top of hopper, carb, repaired rocker arm holder, repair to carb, with mag bracket, stuck, 9.5" planetary gear
3HP Fairbanks Morse Style C Self Oiling loose, unrestored, carb, Fairbanks Morse Mag, spark plug, hopper cooled
Fairbanks Morse ZC, 10 HP Engine radiator cooled, #346, 350-575, rocker arm broken, extra rocker arm & stand & pushrod included, natural gas, loose, v belt clutch pulley, magneto (CCA FBM), original, unrestored
Fairbanks Morse, 2HP Vertical tank cooled, original, unrestored, loose, carb, igniter, cracked water jacket, repaired rocker arm & bracket, loose
3HP Fairbanks Morse Z on cart 160376, stuck, good head & hopper, tractor magneto, with original Fairbanks Morse crank, good timing gear, 9.5" pulley, cart has 12" diameter wheels, cart measures about 31 inches long and 11-1/4 inches wide, nice little engine cart!
3HP Fairbanks Morse Type EV Hopper Cooled stuck, repaired rocker arm and rocker arm stand, Ford automotive carb, modification to hopper for coil
Fairbanks Morse 5-1/2" bore Hopper Cooled Engine carb, muffler, original hand crank, stuck, spark plug, old repaint, 12" pulley, 12-1/2" gear on flywheel, modified fuel tank on hopper
Fairbanks Morse Parts Engine Disal 118, 350 to 700 RPM, stuck, automotive radiator, Jones Foundry Chicago Clutch, incomplete clutch, Fairbanks Morse mag, broken rocker, partial carb
4HP Fairbanks Morse H, Hopper Cooled cylinder about 5" bore, some original paint, cracked cylinder wall on inside hopper, good head, bent valve
Fairbanks Morse Eclipse Engine vertical, hopper cooled, pump jack engine, unrestored, original, carb, stuck
Large Selection of Fairbanks Morse Z, 3HP, hopper cooled engines
Large Selection of Fairbanks Morse Z, 2HP, hopper cooled engines
Large Selection of Fairbanks Morse Z, 1-1/2 HP, hopper cooled engines
John Deere Engines:
RV 4 HP Hopper Cooled Cylinder & Head, 4" bore RV type D, John Deere Plow Company, CL51067, partial carb, cracked cylinder on bottom, piston & rod, 1 rod bearing, modified bracket on cylinder
John Deere 3 HP, Type E, some original paint, loose, igniter, muffler, carb, magneto
John Deere, 3 HP Engine unrestored, stuck, igniter, rocker broke, carb, magneto, muffler
Large selection of John Deere 1-1/2 HP engines
Massey Harris:
Massey Harris, Type 2, 6 HP #6K2680, carb, crank case guard, spark plug, 12" pulley, hopper cooled
Massey Harris, Type 2, 6 HP #6K138, hopper cooled, spark plug, 14" Massey Harris pulley
Massey Harris, Type 2, 3HP #3K1160, hopper cooled, spark plug, carb, 7.5" pulley
Other Engines:
Alpha 1-1/2 HP hopper cooled, unrestored, spark plug, solid flywheel
Stover 2 HP unrestored, loose, Wico, spark plug, carb, on engine cart
Cushman, 3HP, hopper cooled, Wico, loose, old repaint, carb, spark plug, pulley
Cushman, 2HP Sears & Roebucks, hopper cooled, carb, loose
Sattley Montgomery Ward, 1-1/2HP, hopper cooled, old repaint, spark plug
Associated, Hired Hand, 2-1/4 HP, old repaint, loose, hopper cooled, carb
Empire, 1-1/2 HP, Cockshutt Plow Company, unrestored, loose, carb, pulley
Alpha Type F, 1-1/2, hopper cooled, carb, pulley
Lister 3-1/2 HP Vertical with 15 KW Generator #49767, cracked water jacket, spark plug, tank cooled, carb, RA, original, unrestored, loose
Vertical Monitor pump jack engine, hopper cooled, battery box with no lid
Macleod 5 HP #6491, hopper cooled, original, igniter with bracket, 14" pulley,
Stover, 2-1/2 HP, hopper cooled, carb, igniter, 6" pulley
Monitor 1-1/4 HP Vertical, Type VJ, hopper cooled, pump jack engine
Worthington Pump & Machine Co., 3 HP, Type W, #19523, igniter, mag
Eclipse vertical, hopper cooled, pump jack engine, unrestored, original, carb
Fuller & Johnson air cooled pump jack engine, early style, partial carb, unrestored, loose
Alpha, Type D3, W 1-1/2HP, hopper cooled, carb, spark plug, crank guard, gas tank
Fairmont Two Cycle Rail Car Engine, loose, carb, hopper cooled, unrestored
Waterloo 2-1/2 HP #85219, hopper cooled, gas tank, igniter, 10" pulley, unrestored
Witte 3HP #102881, carb, hopper cooled, 5" pulley, no mag, spark plug
Associated 6 HP #602890, igniter, stuck, hopper cooled, no carb, 15" pulley, mag
Call of the West, 9 HP Call of the West, hopper cooled, 15” clutch pulley (8 HP No.1), Webster magneto, igniter, no carb
Waterloo 4-1/2 " bore 12" pulley, hopper cooled, carb, Webster mag & igniter
Vertical R. A. Lister hopper cooled, partial mag, 6" pulley, incomplete, partial carb
Galloway 6 HP, igniter, 1-3/4" lunkenheimer carb, hopper cooled, 16’ pulley, sub base
Associated 6-3/4" bore original, fuel tank & brackets, crank guard, muffler, no carb
Economy 5 HP #102892, Webster magneto, carb, about 12" pulley, hopper cooled
Stover 6 HP #X68698, carb, igniter, Webster bracket, hopper cooled, fuel pump, unrestored
Economy 1-1/2 HP #181172, Webster mag, igniter, carb, hopper cooled, 4" pulley
New Way Vertical Air Cooled, Model#6595, old repaint, spark plug, 8" pulley
Cushman Vertical, tank cooled, on trucks, includes water tank, loose, Schebler carb
5HP Ottawa Saw Engine with Cart & blade #TE25388, spark plug, carb, hopper cooled, 60” saw with eccentric, unrestored
Ontario Wind Engine & Pump Company 3 HP #3504, carb, muffler, Webster mag, igniter, crank guard, hopper cooled
Witte 3 HP #84108, carb, spark plug, fuel tank, 5” pulley, hopper cooled
Economy 5 HP, hopper cooled, crank, no igniter, carb, unrestored, 12” pulley
New Way Vertical air cooled, old repaint, loose, magneto, carb, spark plug, 6” pulley
Farm Master, Sears & Roebuck, 2HP, Model 811-2, Wico, loose, carb, hopper cooled
Galloway, 6HP, fuel tank, 1-3/4" Lunkenheimer carb, igniter, tin crank guard, hopper cooled
Waterloo Style, 5-1/2" bore, igniter, 1-3/4" lunkenheimer carb, 18" pulley, hopper cooled
Parts & Parts Engines:
Cylinder for Hopper Cooped Mogul Side Shaft, 6HP 5" bore, #6535-TA, no cracks, good condition; IHC 4HP parts engine; IHC 6HP base & sub, hopper cooled cylinders for IHC engines; Waterloo Style hopper and parts engines, John Deere parts engines, International M parts engines, Fairbanks Morse Parts Engines; Goold Shapley Muir, Vertical 1-1/2 HP; International Mogul 2-1/2 parts engines; Economy 7HP; Associated 2-1/4 HP parts engines; 7HP Economy Flywheels; Mogul Side Shaft base with partial side shaft; & more!
Shipping Info:
Action Transportation Inc.
Contact: Christopher “Woody” Pomeroy
Phone: 1-800-934-4038 Direct Line: 541-494-1136
Email: cpomeroy@actiontransporation.net
We’re a savings based logistics coordinator and broker. We have equipment and drivers on a regular basis that service all 48 states and Canada. Please contact us for a competitive rate quote.
(truck specifications available by fax or email from Aumann Auctions, Inc, courtesy of Action Transportation Inc.)
Prissel Transport LLC
Contact: Chad Prissel
Phone: 715-579-4739
We specialize in hauling farm equipment, tractors and combines in the midwest and the lower 48 states. Trailers range from 53' stepdeck w/tail and ramps to haul 24 ton and a 48' detach with outriggers to haul 22 ton. Partial and full loads welcome.
Larry W. Sanders & Brian L. Sanders
Contact: Larry or Brian
Address: 33975 Hwy T, Salisbury, MO 65281
Phone: 660-481-2242(home), 660-481-2271(fax), 660-651-9922(Brian’s Cell), 660-651-6407(Larry’s Cell)
We’re a licensed and insured trucking operation that can service all 48 states. Flatbed or stepdeck trailers are available.
Uship
UShip is an online service where customers can post their shipments and trucking companies and individuals will bid on their hauling. Visit www.uship.com for more details.
Tractor House.com
www.tractorhouse.com provides a list of haulers and their contact information. Look under Equipment Haulers for a complete listing.
*Aumann Auctions, Inc. does not endorse or employ any of the listed haulers. This information is provided as a courtesy and it’s the buyer’s responsibility to make arrangements and to research the companies listed above.
Ken Eder Gas Engine Auction- Online Only
Apr 29, 2012
Bidding Ends at 6:00 P.M Central
Ken Eder
644 Niagra Carthage Road
Carthage, NC 28327
This auction is a perfect opportunity for anyone looking to start a project or looking to finish one they are currently working on. We have over 300 lots including engines, flywheels, crank shafts, bases, and much more. Some of the engines include: International, Economy, Fairbanks, Waterloo, John Deere, Novo, R&V. This auction will be conducted on the internet only. We have dates setup for inspection so bidders will be able to view the engines prior to purchase. We will have equipment on the pickup date to assist with loading.
This Company's Auction Feed:
All MarkNet Auctions Feed:
Conducted By:
Aumann Auctions, Inc.
1-888-282-8648
